|CIUMon is running in interactive mode (it has been run manually or is interacting with the desktop).||On the Options menu, click CIUMon Settings. Click the Comm and Flow Control Settings tab. The serial port in use will be selected in the Serial Port list, and the baud rate will be selected in the Baud Rate list.|
|Logging is on||Look at the most recent log file. The log files are in the LOG directory, which is probably either C:\DBDOC\CIUMon\LOG or C:\Program Files\GMCL\DBDOC\LOG, depending on how you installed CIUMon. Near the beginning of the file, there will be several lines indicating the current serial port settings. If you need to change these settings, run CIUMon in interactive mode and change them as above.|
|Logging is off||Use CIUMon Service Controller to turn logging on, then look in the log file.|
DBDOC ©1996 - 2018 G. Michaels Consulting Ltd., all rights reserved. Website largely available under the terms of the AGPLv3. Unless noted otherwise the following are products, trademarks, service marks and/or registered trademarks of their owners and/or holders in the U.S. and/or other countries. MediaView, Microsoft, Visual Studio and Windows are owned and/or held by Microsoft Corporation. AutoCAD is a registered trademark of AutoDesk, Inc. MicroStation is a product of Bentley Systems, Inc. 800xA, ABB, INFI 90, and Symphony are owned and/or held by ABB Group. RoviSys Turbo Lite Server is owned and/or held by The RoviSys Company.