CALCMD AMM 2/3: Calibration Command [FC74]

CALCMD AMM 2/3: Calibration Command [FC74]


Specifications

Spec Description
S1Command calibration (see below)
S2Point calibration (64 ≥ point ≥ 1)

Format for S1

S1 Command Calibration

1 Disable point
2 Disable slave
3 Complete thermocouple
4 External thermocouple (0 millivolts)
5 External thermocouple (80 or 100 millivolts)
6 External point thermocouple (0 millivolts)
7 External point thermocouple (80 or 100 millivolts)
8 RTD external point (100 ohm)
9 RTD external point (400 ohm)
10 Enable point
11 Enable slave
12 Escape/reset calibration logic

Outputs

Block Type Description
80 Real No output