These errors can now be reviewed in Hyperview's error browser.

Some uncommon errors are only available in the legacy error files produced by the build system. Most of them are not particularly serious.

• 800xA color not found [INTERNAL 201]
• Adapt block adapts previous block [CHECK 118]
• Adapt block does not exist [ERROR 014]
• Adapt block: Adapted block does not exist [ERROR 021]
• Adapt block: Not used [ERROR 019]
• Adapt block: Spec out of range [ERROR 020]
• Adapt type mismatch [ERROR 169]
• Adapted block on other page [CHECK 044]
• Adapted coordinates out of order [INFO 032]
• Adapted rung spec [INFO 061]
• AlarmVector tag has case mismatch - tag is in table [ERROR 138]
• AlarmVector tag has case mismatch - tag is not in table [ERROR 139]
• AlarmVector tag is not defined in any database associated with console [ERROR 140]
• Ambiguous wiring [ERROR 121]
• APID block illegal decrease flag [ERROR 086]
• APID block illegal increase flag [ERROR 085]
• APID old algorithm and inhibit inputs [ERROR 087]
• Assertion failed [INTERNAL 080]
• Attempted ADAPT block redefinition [ERROR 176]
• Bad CAD magic number [INTERNAL 002]
• Block adapts a block that is already adapted [ERROR 117]
• Block not wired from same function code [CHECK 186]
• Block number on unwired input [COSMETIC 098]
• Block number too high [ERROR 322]
• Block out of range [ERROR 167]
• Blocks have been overlaid [CHECK 225]
• Bogus source for block zero [BUILD 180]
• Both 0 and 1 have same descriptor [CHECK 064]
• Broken connection [ERROR 345]
• Building multiple 800xA consoles into one project file not yet supported [INTERNAL 200]
• CADNames cannot be opened [ERROR 10044]
• Can't find ProgID for GUID-named dependency [INTERNAL 203]
• Can't open DBF file RESOLVE.DBF [BUILD 10001]
• Cannot determine target [CHECK 347]
• Cannot import error database [INTERNAL 289]
• Choosing description for XRefObjID [CHECK 10029]
• Circular inhibit [CHECK 181]
• Circular reference [CHECK 184]
• Circular symbol inclusion [CHECK 182]
• Circular symbol inclusion of tag [CHECK 183]
• CLD file has not been recompiled. [INFO 10022]
• Completely unconnected wire [ERROR 340]
• Connection to unconfigured variable [ERROR 342]
• Connection wired in Composer only [INTERNAL 170]
• Connection wired in drawing only [INTERNAL 171]
• Continuous exception reports generated [ERROR 145]
• Control character in tag description [INFO 323]
• Could not locate batch include file [BUILD 252]
• Couldn't open font file [BUILD 192]
• DAANG alarm control not an integer [ERROR 090]
• DAANG both de-alarm and return alarm [ERROR 089]
• DAANG illegal alarm control [ERROR 088]
• DAANG suspicious alarm period [ERROR 091]
• Data type mismatch [ERROR 094]
• Database has no records [ERROR 290]
• Descriptor empty [CHECK 015]
• Digital in Alarm Group cannot alarm [CHECK 078]
• DIOFCSpec associated with unknown FC [INFO 10014]
• Discarding description for XRefObjID [CHECK 10030]
• Display not found [CHECK 197]
• Display with GUID not found [CHECK 198]
• Displayed tag has no source - module not built [ERROR 266]
• Document defined in another chapter [INFO 188]
• doVector called with non-string second argument [INTERNAL 244]
• doVector() called with numeric 2nd argument [INTERNAL 243]
• Duplicate global OREF [CHECK 190]
• Duplicate local OREF [CHECK 296]
• Duplicate source [ERROR 092]
• Duplicate station tag [INFO 189]
• Duplicate tag in database [ERROR 103]
• Dynamic definition undefined [INTERNAL 277]
• EbVector references unknown graphic [CHECK 216]
• Element outside configured bounds [INTERNAL 202]
• Enhanced trend has illegal S2 value [ERROR 024]
• Enhanced trend: S1 wired from wrong function code [ERROR 025]
• Error count exceeded [BUILD 60000]
• External output reference is unreachable [ERROR 10015]
• External output reference not found [CHECK 10008]
• F(x) discontinuity (step) [CHECK 031]
• F(x) graph is flat [INFO 035]
• F(x) graph is flat (unwired) [COSMETIC 036]
• F(x) uses large values and may not clamp output [ERROR 034]
• Failed to locate field indices -- not a database? [BUILD 220]
• Failed to locate field name [BUILD 221]
• Failed to open file [BUILD 006]
• Failed to read header [BUILD 001]
• Failed to read library directory [INTERNAL 013]
• Failed to read record [INTERNAL 004]
• Failed to reseek to start [INTERNAL 005]
• FC126 S3 Exceeds 4 Linked Blocks [ERROR 318]
• FC225 S5 must be 1 for FC228 [ERROR 311]
• Fewer fields than substitutions [BUILD 222]
• File contains a space in its name [COSMETIC 213]
• File version unknown [INTERNAL 271]
• Font file not found [BUILD 191]
• Frozen import block [ERROR 093]
• Function block chain loop [ERROR 325]
• Function block disabled [ERROR 297]
• Gain spec is adapted [INFO 119]
• Got lost parsing file [INTERNAL 10007]
• Graphic link target is null [INTERNAL 291]
• Harmony I/O block illegally wired [ERROR 095]
• History tag references tag not in database [ERROR 253]
• Ignoring adapted Block 0 [ERROR 082]
• Illegal adapt block, spec 3 is 0 [ERROR 116]
• Illegal import (not exception-reported) [ERROR 129]
• Illegal import (type mismatch) [ERROR 131]
• Illegal import (different loop) [ERROR 130]
• Illegal import (full status ignored) [CHECK 132]
• Illegal module value [INTERNAL 066]
• Illegal spec value: should be 0 or 1 [ERROR 149]
• Illegal spec value: Spec S7 from 0 - 100 [ERROR 146]
• Import from same PCU [ERROR 128]
• Import information [ERROR 255]
• Import Module Status is wired but non-functional [CHECK 174]
• Import out of range [ERROR 336]
• Imported block has no source - module not built [ERROR 265]
• Included image was not found [CHECK 294]
• Inconsistent LPM data [ERROR 10020]
• Increasing drawing height [COSMETIC 023]
• Increasing drawing width [COSMETIC 022]
• Inhibit tag not found [ERROR 348]
• Input list attempts to import nonexistent block 9999 [ERROR 334]
• Input list attempts to import out-of-range block 9999 [ERROR 335]
• Input list imports block 9999 [CHECK 333]
• Input wiring expected - Harmony [CHECK 187]
• Inputs have been overlaid [CHECK 226]
• Integrator disabled by spec value [ERROR 298]
• Internal error: get_block() non-block tag [INTERNAL 049]
• Internal error: Unknown hotspot [INTERNAL 016]
• Invalid block number on line [INTERNAL 246]
• Invalid CAD file: Too short [INTERNAL 010]
• Invalid CAD file: Zero length [INTERNAL 009]
• Invalid header or bad magic number [INTERNAL 10011]
• Invalid loop number for block [INTERNAL 247]
• Invalid loop: high byte used [INTERNAL 248]
• Invalid record length [INTERNAL 003]
• IREF does not have an input [ERROR 096]
• IREF GlobalIRef import mismatch [INFO 10019]
• IRef not found in IRefRes table: set to blank [INTERNAL 10013]
• IRef not found in IRefRes table: skipping [INTERNAL 10012]
• Legacy err message [INTERNAL 10005]
• Legacy fatal message [INTERNAL 10006]
• Legacy warning message [INTERNAL 10004]
• Library missing [COSMETIC 026]
• Linked Block Already Linked [ERROR 317]
• Linked Block Connected To Self [ERROR 319]
• Linked Block Has Wrong FC [ERROR 316]
• Live wire not connected [CHECK 199]
• Loop out of range [ERROR 164]
• M1 display file not found (not configured) [CHECK 195]
• Macro is present in multiple libraries [INFO 10031]
• Mismatched tagname [CHECK 205]
• Mismatched tagname (not in database) [CHECK 204]
• Missing associated file [INTERNAL 285]
• Missing definitions file [INTERNAL 292]
• Missing dynamic target [INTERNAL 275]
• Missing graphic target [INFO 314]
• Missing LBR Report [INTERNAL 000]
• Missing M1 not defined [CHECK 267]
• Missing string introducer [INFO 10040]
• Missing symbol or sub-model [BUILD 099]
• Module mismatch: does not match module in file [ERROR 10021]
• Module mismatch: does not match Module in file -- skipping [ERROR 10038]
• Module out of range [ERROR 166]
• More than one input to connector [ERROR 106]
• Multilevel alarms disabled [ERROR 062]
• Multiple slave FCs [ERROR 153]
• Multiple slave FCs: Too many FC 132's [ERROR 155]
• Multiple slave FCs: Too many FC 149's [ERROR 154]
• Multiple targets [ERROR 328]
• Multiple TSTALM [ERROR 084]
• Multiple wires at source: assuming connector [COSMETIC 219]
• Negative block number [CHECK 037]
• Negative string length [INFO 10041]
• Nested inhibit [CHECK 069]
• Never found library file [COSMETIC 011]
• No SHAPE.LBR was found [BUILD 012]
• No source: Imported block not found [ERROR 110]
• No source: Other [ERROR 113]
• No source: Used in display [ERROR 111]
• No source: Verify [COSMETIC 112]
• No tag database specified for console [BUILD 108]
• No valid sections found in XDC file [BUILD 109]
• No wired input [COSMETIC 097]
• Node out of range [ERROR 165]
• Non-local exit called -- CLD resolution [INTERNAL 10043]
• Non-local exit called at offset [INTERNAL 10042]
• Non-local exit from file [INTERNAL 060]
• Non-orthogonal rotation [INTERNAL 038]
• Non-orthogonal shear rotation [ERROR 327]
• Not enough inputs [ERROR 133]
• Only handling first tag [CHECK 048]
• OREFs differ in case only [CHECK 185]
• Out of expected range [ERROR 10026]
• Outdated file format [INTERNAL 206]
• Override on input [INFO 122]
• Override on output: forced to a constant [INFO 151]
• Override on output: held [INFO 150]
• Override on output: invalid code [INFO 152]
• Parse error in file [INTERNAL 115]
• PDF security prevents embedding [BUILD 324]
• PID block uses derivative with PV from discontinuous input [ERROR 307]
• PID Controller has all active tuning constants zero [ERROR 173]
• PID Controller has primary gain spec zero [ERROR 172]
• PID lag spec zero [CHECK 177]
• Point has no description [COSMETIC 251]
• Possibly corrupt GPI mdb File [ERROR 315]
• Possibly corrupt HGS mdb File [CHECK 320]
• Possibly corrupt HPG mdb File [CHECK 321]
• Problem communicating with dongle [INTERNAL 045]
• QOR forced to 1 [INFO 135]
• QOR used as a NOR [INFO 134]
• Record failed to find matching format [INTERNAL 210]
• REDAI both inputs same block [CHECK 072]
• REDAI deadband exceeds rate limit [CHECK 075]
• REDAI invalid deviation S4 [CHECK 074]
• REDAI quality is never tested [CHECK 175]
• REDAI select input hardwired [CHECK 073]
• REDAI select input wired but ignored [CHECK 079]
• REDDI both inputs from same block [CHECK 076]
• REDDI select input hardwired [CHECK 077]
• Referenced M1 display file not found [CHECK 194]
• Regex compilation error [INTERNAL 039]
• Regex execution error [INTERNAL 040]
• REMSET limits out of order [ERROR 261]
• Requested color index out of range [INTERNAL 193]
• RESTR block order wrong [ERROR 065]
• RESTR block will never save [ERROR 309]
• RESTR block will update to NVRAM every cycle [INFO 308]
• Rung block did not use all inputs to compute output [ERROR 127]
• Rung block spec is unwired but used [ERROR 125]
• Rung block spec is wired but unused [ERROR 124]
• Rung block spec is wired from constant [ERROR 126]
• Rung stack not initialized [ERROR 306]
• Same-bus input cannot read value in other loop [ERROR 10016]
• Same-bus input cannot read value in other PCU [ERROR 10017]
• Same-loop input attempts to read value in other loop [ERROR 10018]
• Segment control block auto-sequencing enabled [INFO 302]
• Segment control block bad priority [ERROR 300]
• Segment control block check cycle time [ERROR 303]
• Segment control block checkpoint period is too small [ERROR 304]
• Segment control block duplicate priority [ERROR 301]
• Skipping file: Error parsing submodel [INTERNAL 055]
• Skipping file: File contains no records [INTERNAL 059]
• Skipping file: File too short [INTERNAL 058]
• Skipping file: OpenDesign Exception [INTERNAL 052]
• Skipping file: Possibly corrupt A/B PLC file [INTERNAL 057]
• Skipping file: Unable to read file [INTERNAL 054]
• Skipping file: Unknown M1/M2 file type [INTERNAL 056]
• SODG aliasing error [ERROR 160]
• Source in same module [ERROR 157]
• Source wired to another source [ERROR 158]
• Span is zero for dynamic bar [COSMETIC 231]
• Spare block used in downstream wiring [CHECK 168]
• Spec input index out of range [ERROR 018]
• Spec is illegally adapted [ERROR 083]
• Specification out of valid range [ERROR 299]
• SQLite bind error [INTERNAL 208]
• SQLite error [INTERNAL 081]
• SQLite error [INTERNAL 207]
• SQLite FTS Indexing Batch Failed [ERROR 313]
• SQLite FTS Indexing Failed [ERROR 312]
• ST parse error [INTERNAL 346]
• Station span * PID gain greater than 125.0 [INFO 179]
• Station span * PID gain less than 80.0 [INFO 178]
• Symbol flag detection failed [INTERNAL 287]
• System error total exceeded [BUILD 60001]
• Tag atom not upper case [CHECK 264]
• Tag failed to find matching format [INTERNAL 209]
• Tag index not found [ERROR 159]
• Tag index not found [ERROR 272]
• Tag index not found in database [ERROR 123]
• Tag mismatch [ERROR 101]
• Tag name not found in any database [ERROR 067]
• Tag name not upper case [ERROR 263]
• Tag not an exception report [ERROR 256]
• Tag not found by name [INTERNAL 293]
• Tag not found in any database [ERROR 284]
• Tag not found in correct database [ERROR 288]
• Tag not found where specified [ERROR 068]
• Tag referenced in PNT database has no LPMB info [COSMETIC 250]
• Tag renames block [ERROR 144]
• Tag type mismatch [ERROR 102]
• Tag used in graphic not exception-reported [ERROR 141]
• Tag/trend mismatch [ERROR 105]
• TagAtom mismatch [CHECK 229]
• Tagname is illegal in PCView [ERROR 104]
• Tested block on different page [CHECK 211]
• Tokenization unrecognized [INTERNAL 269]
• Too big for float [ERROR 10027]
• Too big for short: integer value [ERROR 10009]
• Too big for unsigned short [ERROR 10024]
• Too many fields [INTERNAL 223]
• Too many outputs [ERROR 137]
• Too many segment control blocks [ERROR 305]
• Too many tag databases for tagmap [BUILD 249]
• Too small for float [ERROR 10028]
• Too small for short [ERROR 10023]
• Too small for unsigned short [ERROR 10025]
• Trend block is wired from constant [COSMETIC 258]
• Trend block not used on any graphics or archived [CHECK 257]
• Trend definition file not found [CHECK 196]
• Trend does not have matching tag in any associated database [ERROR 107]
• Trend index (tag) does not reference a trend in any associated trend database [ERROR 142]
• Trend index does not reference a trend in any associated trend database [ERROR 143]
• Trend referenced, but no tags configured in any database [COSMETIC 254]
• Trend tag not found in any database [ERROR 163]
• Trend tag referenced by two tags [ERROR 161]
• Trend tag refers to missing or invalid entry [ERROR 162]
• Trip on fault (defined I/O point bad) [ERROR 148]
• Trip on fault (will trip on failure) [ERROR 147]
• TSTALM checks subsequent block [CHECK 212]
• TSTALM does not test base block [CHECK 310]
• TSTQ on import quality only [CHECK 070]
• TSTQ tests block not propagating quality [ERROR 071]
• TSTQ tests block with no quality [ERROR 063]
• TSTQ tests executive block [CHECK 156]
• Type code cannot be rendered [INTERNAL 278]
• Unable to find bitmap [BUILD 100]
• Unable to parse node [INTERNAL 027]
• Unconnected wire end [ERROR 339]
• Unexpected function code [INTERNAL 017]
• Unhandled calculation [ERROR 326]
• Unhandled complex source configuration [INTERNAL 341]
• Unhandled data after record [INTERNAL 234]
• Unhandled escape type [INTERNAL 236]
• Unhandled line [INTERNAL 237]
• Unhandled LMM spec value [INTERNAL 235]
• Unhandled pe header data [INTERNAL 233]
• Unknown AC 800M block type [INTERNAL 338]
• Unknown access code [INTERNAL 273]
• Unknown atom [CHECK 047]
• Unknown Component Number [INTERNAL 270]
• Unknown dynamic bar direction [INTERNAL 232]
• Unknown Exception [INTERNAL 053]
• Unknown logic state type [INTERNAL 245]
• Unknown picture type in ctx [INTERNAL 218]
• Unknown record type [INTERNAL 240]
• Unknown shape (missing library) [ERROR 042]
• Unknown shape (no user library) [ERROR 041]
• Unknown shape (not in library) [ERROR 043]
• Unknown subtype for block ed 50 [INTERNAL 242]
• Unknown subtype on line [INTERNAL 241]
• Unknown tag type [INTERNAL 259]
• Unknown type code [INTERNAL 276]
• Unrecognized binary data [INTERNAL 274]
• Unreferenced graphic file [INFO 214]
• Unreferenced graphic name [INFO 215]
• Unresolved connection [ERROR 344]
• Unsupported dynamic symbol subtype [INTERNAL 239]
• Unsupported FC used in CFC [ 10045]
• Unsupported function [INTERNAL 238]
• Unsupported graphic primitive [INTERNAL 217]
• Unsupported non-literal tag name [INTERNAL 343]
• Unused extra inputs [INTERNAL 136]
• User macro registered multiple times [INFO 10039]
• Vertical text on drawing [INFO 050]
• Wired gain spec is adapted [INFO 120]
• X coordinate adapted [INFO 029]
• X coordinates out of order [ERROR 033]
• XOR output forced to 0 [CHECK 281]
• XOR output forced to 1 [CHECK 280]
• XOR output forced to complement input [CHECK 283]
• XOR output forced to track input [CHECK 282]
• XOR output forced to track input [CHECK 279]
• Y coordinate adapted [INFO 030]
• Zero gain on input block [CHECK 262]