| Spec | Description |
|---|---|
| S1 | Command calibration (see below) |
| S2 | Point calibration (64 ≥ point ≥ 1) |
| 1 | Disable point |
| 2 | Disable slave |
| 3 | Complete thermocouple |
| 4 | External thermocouple (0 millivolts) |
| 5 | External thermocouple (80 or 100 millivolts) |
| 6 | External point thermocouple (0 millivolts) |
| 7 | External point thermocouple (80 or 100 millivolts) |
| 8 | RTD external point (100 ohm) |
| 9 | RTD external point (400 ohm) |
| 10 | Enable point |
| 11 | Enable slave |
| 12 | Escape/reset calibration logic |
| Block | Type | Description |
|---|---|---|
| 80 | Real | No output |
DBDOC ©1996 - 2024 G. Michaels Consulting Ltd., all rights reserved. All other trademarks and registered trademarks are the property of their respective holders. Website source largely available under the terms of the AGPLv3.