Spec | Description |
---|---|
S1 | Dependent variable |
S2 | Independent variable 1 |
S3 | Independent variable 2 |
S4 | Independent variable 3 |
S5 | Independent variable 4 |
S6 | Number of independent variables |
S7 | Number of data sets to buffer |
S8 | Minimum number of good data sets required |
S9 | Time/trigger mode flag |
S10 | Time between calculations (minutes) |
S11 | External trigger |
S12 | Data storage mode flag |
S13 | High range of independent variable 1 |
S14 | Low range of independent variable 1 |
S15 | Edit mode switch 0-calculate 1-edit |
S16 | Set to edit value |
S17 | Set quality toggle flag |
S18 | Reset flag |
S19 | Initial default for parameter 1 |
S20 | Initial default for parameter 2 |
S21 | Initial default for parameter 3 |
S22 | Initial default for parameter 4 |
S23 | Desired goodness of fit |
S24 | Default update period (hours) |
S25 | Spare |
S26 | Spare |
S27 | Spare |
Block | Type | Description |
---|---|---|
N | Real | Parameter 1 |
N+1 | Real | Parameter 2 |
N+2 | Real | Parameter 3 |
N+3 | Real | Parameter 4 |
N+4 | Real | Goodness of fit |
N+5 | Real | Maximum model mismatch |
N+6 | Real | Row number causing maximum model mismatch |
N+7 | Real | Number of rows with good quality |
N+8 | Real | Time of last computation |
N+9 | Bit | State of outputs: 0 = computed 1 = default |
Block | Type | Description |
---|---|---|
N | Real | Parameter 1 |
N+1 | Real | Parameter 2 |
N+2 | Real | Parameter 3 |
N+3 | Real | Parameter 4 |
N+4 | Real | Dependent variable (y) |
N+5 | Real | Independent variable 1 (X1) |
N+6 | Real | Independent variable 2 (X2) |
N+7 | Real | Independent variable 3 (X3) |
N+8 | Real | Independent variable 4 (X4) |
N+9 | Bit | Quality of data point: 0 = bad, excluded 1 = good, included |
DBDOC ©1996 - 2024 G. Michaels Consulting Ltd., all rights reserved. All other trademarks and registered trademarks are the property of their respective holders. Website source largely available under the terms of the AGPLv3.