Spec | Description |
---|---|
S1 | Configuration lock |
S2 | Remote loop for tuning/configuration |
S3 | Remote PCU for tuning/configuration |
S4 | Remote module for tuning/configuration |
S5 | Port 0 delay (millisecond) |
S6 | Port 0 transmitter turn off delay after command/reply sent (millisecond) |
S7 | Port 1 command/reply delay after transmitter turned on (msec) |
S8 | Port 1 transmitter turn off delay after command/reply sent (msec) |
S9 | Maximum exception report timer (0-255 secs) |
S10 | Communication status watchdog timer (seconds) |
S11 | Action on communication equipment failure |
S12 | Communication retry count |
S13 | Port data characteristics |
S14 | Spare |
Block | Type | Description |
---|---|---|
1 | Bit | Output indicates port 0 communication status: 0 - good, 1 - alarm |
2 | Bit | Output indicates port 1 communication status: 0 - good, 1 - alarm |
3 | Integer | Output is number of exception reports per second |
4 | Integer | Output is average number of exception reports per second |
5 | Integer | Output is maximum number of exception reports per second |
6 | Integer | Reserved |